MCR20 rack kit for automatic stylus changing with TP20 (includes 1 × medium force and 1 × extended force modules)


Product code: A-1371-0265

Image of A-1371-0265
The MCR20 module changing rack is designed to securely store up to six TP20 probe modules for automatic changing, and to protect them from airborne contaminants. The MCR20 is easily mounted onto any CMM. Setting the MCR20 rack alignment and probe module changing co-ordinates requires minimal effort. The medium force probe module is identified by a grey cap. This probe module is designed for applications where a higher trigger force than standard is required. The recommended stylus limits for the medium force probe module are:•Any stylus type up to 60 mm long•Star and cranked styli up to 20 mm offset The extended force probe module is identified by a brown cap. Typically, this probe module will only be required with large stylus assemblies and where spurious triggers caused by machine vibration and acceleration preclude the use of either the standard or medium force probe modules. The recommended stylus limits for the extended force probe module are:•Any stylus type up to 60 mm long•Star and cranked styli up to 20 mm offset

Technical table

Ports6
Part NumberDescriptionQuantity
A-1371-01631
A-1371-0271TP20 medium force module1
A-1371-0272TP20 extended force module1